Setting up your Linksys E900 router Go to product viewer dialog for this item.
requires physically connecting the hardware and configuring its web-based dashboard. This guide bypasses the need for an installation CD, providing a straightforward process to get your network running and secure in just a few minutes. 1. Connect the Hardware
Power off your existing broadband internet modem completely. Plug an Ethernet cable into the modem’s Ethernet port.
Connect the other end to the yellow Internet port on the back of the Linksys E900
Connect your computer to any of the four blue Ethernet ports using another cable. Plug in and power on both your modem and the Linksys E900 router
Wait for the power light on the router to stay solid before moving forward.
(Note: If you do not have an Ethernet port on your computer, you can connect wirelessly to the default Wi-Fi network name and password printed on the sticker at the bottom of the router). 2. Access the Admin Dashboard Open any web browser on your connected computer. Type 192.168.1.1 into the address bar and press Enter.
Skip the Cisco Connect software prompt if it appears by clicking “Manual configuration” or “Cancel”.
Enter admin in both the username and password fields when prompted by the login box. 3. Configure the Internet Settings
Leave a Reply